0

  • Your shopping cart is empty!

Waveshare Dual Gigabit Ethernet 5G/4G Base Board Designed for Raspberry Pi Compute Module 4

  • Product Code: EPI23006
  • Availability: 1

0 reviews Write a review

  • Rs.4789.00
  • (Excluding 18% GST)

OR

For all Bulk & B2B Product Enquiries Kindly share your requirement at support@electropi.in

This is a Waveshare Dual Gigabit Ethernet 5G/4G Base Board Designed for Raspberry Pi Compute Module 4. It is suitable for evaluating the Raspberry Pi CM4 or being integrated into end products.


Whats on Board:

  1. CM4 socket: suitable for all variants of Compute Module 4
  2. 40PIN GPIO header: for connecting sorts of HATs
  3. RJ45 Gigabit Ethernet
    dual RJ45 Gigabit Ethernet, 10/100/1000M compatible
    ETHERNET 0: CM4 original ETH
    ETHERNET 1: USB extended ETH
  4. USB 3.2 ports: 3x USB 3.2 Gen1, for connecting sorts of USB devices
  5. HDMI connectors: 2x HDMI, supports 4K 30fps output
  6. CAM: 2x MIPI CSI camera ports
  7. DC power supply: 7~36V DC wide voltage range power input
  8. Dual LED indicators
    red: Raspberry Pi power indicator
    green: Raspberry Pi operating status indicator
  9. Micro SD card slot: for connecting a Micro SD card with pre-burnt image (Lite variant ONLY)
  10. FAN header: for connecting cooling fan, allows speed adjustment and measurement
  11. DISP0
    MIPI DSI display port
  12. USB SLAVE port:for burning system image into Compute Module 4 eMMC variants
  13. RTC battery holder: supports CR1220 button cell
  14. RTC interruption configuration
    PI-RUN: CM4 will reboot on RTC interruption
    GN-EN: CM4 power-down on RTC interruption
    D4: D4 pin is triggered on RTC interruption
  15. IO-VREF selection:set the CM4 IO logic level as 3.3V or 1.8V
  16. FAN power supply selection:select 5V or 12V power to drive the fan
  17. System function configuration
    BT_DIS: Bluetooth disabled, for CM4 with antenna variant ONLY
    WiFi_DIS: WiFi disabled, for CM4 with antenna variant ONLY
    WP_DIS: boot mode switch, ONLY be used when NOT booted from eMMC or SD card
  18. RTC/FAN I2C bus selection
    SDA0/SCL0: I2C-10 is shared with CSI/DSI
    GPIO3/2: I2C-1 is shared with 40PIN header
  19. RTL8153:USB Gigabit Ethernet chip
  20. EMC2301:fan controller allows fan speed adjustment and measurement
  21. VL805:USB 3.0 HUB


Useful link:

For Software setup, please follow this tutorial.


Package Includes:

1 x Waveshare Dual Gigabit Ethernet 5G/4G Base Board
Brand/Manufacturer Generic
Country Of Origin China
Packer / Importer Address Circuit Pulse Private Limited, Sector-47, Gurugram, Haryana - 122018, India
MRP Rs. 7498.9 (Inclusive of all Taxes)
Write a review
Please login or register to review

* Product Images are shown for illustrative purposes only and may differ from actual product.